TCR-DLI GEN2 Quickstart
Thank you for choosing a Parametric Analytics product. You have chosen a quality product Made in Switzerland. Each counter is handmade and individually tested.
This Quick Start Guide explains all the steps necessary to get the device up and running. Click on the images to enlarge them.
Further information like LoRaWAN® integration, payload decoding can be found in the TCR Users Manual.
Open the box and check the contents.
Live Radar Traffic Counter GEN2, 12V DC powered
Connector Plug with screw terminals.
Optional parts when ordered together with the counter.
Bracket to mount the device to a pole or flat surface. The holder can be tilted. Mounting screws for the counter are included.
Material to attach the holder to a mast is not included.
Power Supply 12V, 40W, IP67
PSU12 may only be installed by a qualified electrician. There is a danger to life in the event of incorrect handling.
To achieve the most accurate measurement possible, planning the installation is essential.
Horizontal or Top Down?
The devices can be operated both directly next to the road or elevated and looking down from above. We recommend using a laser measuring tool or a laser pointer to align the device correctly.
The device works best when the following rules are observed.
LTR vs RTL
The TCR traffic counters distinguish between 2 directions.
- RTL = objects which come from the right and disappear to the left. The left LED will pulse once in this case.
- LTR = objects which come from the left and disappear to the right. The right LED will pulse once in this case.
Measure distance to lanes
In order for the device to determine the velocities, the distance to the object must be known. The distance can be determined with a tape measure or a laser distance meter. Measurements are taken from the middle of a track to the front of the device.
- RTLDist = Distance in cm to the RTL movement line.
- LTRDist = Distance in cm to the LTR movement line.
Connect USB cable
Open the service lid and connect a USB-to-Micro-USB cable Connect the other end to a Windows PCs USB-Port. The RTL LED should start to blink.
Configure using PPX
While the device is connected to the PC open ppx.parametric.ch to access the online configuration tool. Follow the instructions on the screen to establish a connection.
Set Distance to Lanes
Once connected open Radar-Settings and find Left To Right Lane Distance and Right To Left Lane Distance
- Enter LTRDist value you measured in #measure-distance-to-lanes) into the field LTRDist
- Enter RTLDist value you measure in #measure-distance-to-lanes) into the field RTLDist
- Press Save
Assemble M12 Plug
The scope of delivery includes an M12 cable round connector (TE T4112002081-000) with screw terminals. This is to be connected to a 12V power supply.
Please connect V- / V+ cables to Pin 1 and Pin 2. Use a screw driver #0 or #00 for this.
|0V DC (-)
5-12V DC (+)
Connect M12 Plug
The M12 connectors have a coding notch (A Coding).
Check the pins before plugging in
Rotate the plug so that the notch matches the pin in the socket
Carefully insert the plug by hand
Gently tighten knurled screw by hand
Plug in the M12 connector onto the M12 socket on the right side of your TCR. Tighten the ring by hand.
Carefully tighten the MT80-15 holder with the supplied screws. Use a 25 HEX screw driver for that.
Warning: Using longer screws could crack the enclosure.
Installing the Counter
If you mount the counter to a pole or mast use pipe clamps or metal straps of suitable length to secure MT80-15 bracket.
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Parametric GmbH, its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Parametric”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.
Parametric makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Parametric disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Parametric's knowledge of typical requirements that are often placed on Paramtric products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Paramtric's terms and conditions of purchase, including but not limited to the warranty expressed therein.
Hyperlinks may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Parametric of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Parametric disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links.
Except as expressly indicated in writing, Parametric products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Parametric product could result in personal injury or death. Customers using or selling Parametric products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Parametric personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Parametric. Product names and markings noted herein may be trademarks of their respective owners