PCR2-XIO Datasheet
PCR2 are bidirectional people counters that use a new type of 24 GHz radar transceiver to detect motion from both directions simultaneously.
The PCR2-XIO is able to control external equipment wit its integrated XIO extension board. There are 2 solid state relais on the XIO board.
Readings are can be used to switch the relais and/or can be transmitted at regular intervals over a public or private LoRaWAN™ network. All parametric sensors are equipped with a USB configuration port for firmware setup and update.
Features
- Rugged device with protection level against water and dust
- Anonymous people counting by using 24 GHz radar
- Bi-directional
- Interval or totalizer
- LoRaWAN™ data uplink intervals between 1min up to 1 day
- 2 Solid State Relais that can switch up to 60V / 2A
- 4 XIO operating modes (pulses, movement, totalizer over limit, remote controlled)
- Configuration via USB-Port or LoRaWAN™ Downlinks
- Pole or surface mount
- Firmware updates over USB
- Free Lifetime firmware updates
- Swiss made
- 24 months warranty
Applications
- Using the sensor to control equipment
- Industrial counting
- Facility management
- Security
Technical Specification
Note: This technical specs relate to Firmware 4.0
Side Mounting
When mounted at a wall or at a pole, PCR2-XIO can detect people passing by in both directions on walkways 0.5m up to 5m wide.
IMPORTANT: Persons walking side-by-side will be counted as one person.
Tilted
The device can be mounted at a pole at around 3m facing towards the walkway. Our pole mount MT80-10 (accessory) can be used for that.
IMPORTANT: Persons passing by walking side by side ca not be separated and will be counted as one person.
Mechanical Specs
| Mechanical | |
|---|---|
| Size (L x W x H) | 100 x 100 x 40mm |
| Weight | 290g |
| Protection class (IEC 60529) | IP65 |
| Wall mount holes behind hinged caps |
Radar
| Radar Detection | |
|---|---|
| Frequency | 24GHz |
| Beam Aperture | 80° / 34° |
| Range | 50-500cm |
| Movement detection | bi-directional |
| Movement speed | 1-20 km/h |
| Mounting | side mounting tilted |
| Counting modes | interval totalizer |
LoRaWAN® Modem
| LoRaWAN® | |
|---|---|
| LoRaWAN® Specification | LoRaWAN® 1.0.3 Regional Parameters v1.0.3revA |
| Device Classes | A or C |
| LoRaWAN® Features | OTAA, ADR, LinkCheck, DeviceTime |
| LoRaWAN® Payloads | DeviceID (9 bytes), AppData (10 bytes) |
| Antenna | internal monopole, dual-band 868-870 MHz, 902-928 MHz |
| Antenna Gain | 0.3 @ 868 MHz, 1.0 @ 902 MHz |
| Region | Channel Datarate | Channels | Channel Groups | Max EIRP |
|---|---|---|---|---|
| EU868 | DR0-DR7 | 3 (863-870 MHz) | n/a | 16.0 dB |
| AS923 | DR0-DR7 | 2 (915-928 MHz) | AS923-1 only | 16.0 dB |
| US915 | DR0-DR4 | 64+8 (902-928 MHz) | All FSB1 FSB2 FSB3 FSB4 FSB5 FSB6 FSB7 FSB8 |
20.0 dB |
| AU915 | DR0-DR6 | 64+8 (915-928 MHz) | FSB1 FSB2 FSB3 FSB4 FSB5 FSB6 FSB7 FSB8 |
20.0 dB |
Power Options
DC
| DC Power | |
|---|---|
| Terminals | 2 Cage Clamp, Push-In |
| Recommended Wire Diameter | 12-22 AWG (0.2 – 0.75mm²) |
| Voltage | 5V-12VDC |
| Current | 25mA @ 5VDC 19mA @ 12VDC |
XIO Digital Outputs
| DO | |
|---|---|
| Digital Outputs | 2 |
| Type | SSR |
| Max. Voltage | 60 V DC |
| Max. Current | 2A |
| Terminals | 2 Cage Clamp, Push-In |
| Recommended Wire Diameter | 12-22 AWG (0.2 – 0.75mm²) |
Example Wiring Diagram
Scope of delivery
- 1x PCR2-XIO
- 1x QuickStart Manual
Ordering Information
The order number (SKU) is composed as follows
| Region (*) | ||
|---|---|---|
| PCR2 | -EU868 -AS923 -US915 -AU915 |
-XIO |
(*) LoRaWAN® Region can be changed by using the command line interface.
Accessories
| SKU | Description | Used for |
|---|---|---|
| MT80-10 | Mounting Bracket, stainless steel, 80° tiltable | mounting PCR2-XIO on a pole tilting down to the walkway |