PCR2-ODB Datasheet
PCR2 are bidirectional people counters that use a new type of 24 GHz radar transceiver to detect motion from both directions simultaneously.
The PCR2-ODB is designed for outdoor usage in harsh environments and is IP65 protected. When mounted on a walkway the integrated radar transceiver can count pedestrians walking parallel to the the devices surface.
PCR2-ODB devices have a power socket to connect to an external battery, such as the BBX55 (55Ah IP65 battery box). The box can be placed under soil or snow.
Counter values are transmitted at regular intervals over a public or private LoRaWAN™ network. All parametric sensors are equipped with a USB configuration port for firmware setup and update.
Features
- Rugged device with protection level against water and dust
- Anonymous people counting by using 24 GHz radar
- Bi-directional
- Interval or totalizer
- LoRaWAN™ data uplink intervals between 1min up to 1 day
- RST16i3 Socket for connecting external battery boxes
- Configuration via USB-Port or LoRaWAN™ Downlinks
- Pole or surface mount
- Firmware updates over USB
- Free Lifetime firmware updates
- Swiss made
- 24 months warranty
Applications
- Outdoor People Counting in remote areas where there is no sun
- Slow objects counting
- Security
Technical Specification
Note: This technical specs relate to Firmware 4.0
Side Mounting
When mounted at a wall or at a pole, PCR2-ODS can detect people passing by in both directions on walkways 0.5m up to 5m wide.
IMPORTANT: Persons walking side-by-side will be counted as one person.
Tilted
The device can be mounted at a pole at around 3m facing towards the walkway. Our pole mount MT80-10 (accessory) can be used for that.
IMPORTANT: Persons passing by walking side by side ca not be separated and will be counted as one person.
Mechanical Specs
| Mechanical | |
|---|---|
| Size (L x W x H) | 150 x 150 x 60mm |
| Weight | 830g |
| Protection class (IEC 60529) | IP65 |
| Wall mount holes behind hinged caps |
Radar
| Radar Detection | |
|---|---|
| Frequency | 24GHz |
| Beam Aperture | 80° / 34° |
| Range | 50-500cm |
| Movement detection | bi-directional |
| Movement speed | 1-20 km/h |
| Mounting | side mounting tilted |
| Counting modes | interval totalizer |
LoRaWAN® Modem
| LoRaWAN® | |
|---|---|
| LoRaWAN® Specification | LoRaWAN® 1.0.3 Regional Parameters v1.0.3revA |
| Device Classes | A or C |
| LoRaWAN® Features | OTAA, ADR, LinkCheck, DeviceTime |
| LoRaWAN® Payloads | DeviceID (9 bytes), AppData (10 bytes) |
| Antenna | internal monopole, dual-band 868-870 MHz, 902-928 MHz |
| Antenna Gain | 0.3 @ 868 MHz, 1.0 @ 902 MHz |
| Region | Channel Datarate | Channels | Channel Groups | Max EIRP |
|---|---|---|---|---|
| EU868 | DR0-DR7 | 3 (863-870 MHz) | n/a | 16.0 dB |
| AS923 | DR0-DR7 | 2 (915-928 MHz) | AS923-1 only | 16.0 dB |
| US915 | DR0-DR4 | 64+8 (902-928 MHz) | All FSB1 FSB2 FSB3 FSB4 FSB5 FSB6 FSB7 FSB8 |
20.0 dB |
| AU915 | DR0-DR6 | 64+8 (915-928 MHz) | FSB1 FSB2 FSB3 FSB4 FSB5 FSB6 FSB7 FSB8 |
20.0 dB |
Power Options
Battery Input
| Battery Input | |
|---|---|
| Input voltage | 5-12 VDC |
| Input current | 19mA @ 12VDC typ. |
Note: We recommed using the Parametric BBX55 IP65 Battery Box. However it is possible to use an own external battery. Please make sure you use a input fuse of 1A slow blow.
RSTi3 Socket
- Pin 1: +12V DC
- Pin 2: GND
Scope of delivery
- 1x PCR2-ODB
- 1x QuickStart Manual
Ordering Information
The order number (SKU) is composed as follows
| Region (*) | ||
|---|---|---|
| PCR2 | -EU868 -AS923 -US915 -AU915 |
-ODB |
Accessories
| SKU | Description | Used for |
|---|---|---|
| MT80-15 | Mounting Bracket, stainless steel, 80° tiltable | mounting PCR2-ODS on a pole tilting down to the walkway |
| WPMB | Pole Mounting Bracket, ASA plastics, fixed angle | mounting PCR2-ODS to a vertical or horizontal pipe w/o beside the walkway |
| BBX55 | Battery Box with 12V/55Ah Lead Crystal battery | |
| BBXC/5 | Connecting cable battery box - Radar Counter, 5m | |
| BBXCHG | Smart Battery Charger, Adapter Cable for BBX Battery Boxes |